Bar stock heating forging furnace-environmental protection heating furnace-medium frequency forging furnace

With constant current and constant power control functions, it greatly optimizes the heating process of metals, realizes efficient and rapid heating, and greatly exerts the superiority of products; Under the same conditions, it has the effect of saving twice the power compared with the high-frequency heating equipment in the traditional electronic tube; With 100% load design, it can work continuously for 24 hours, and can be equipped with infrared temperature measurement to realize automatic temperature control, improve heating quality and simplify manual operation; With heating-insulation-cooling three-stage function setting, the required heating and insulation process can be obtained, and it can adapt to batch and repetitive heating places; With overcurrent, overvoltage, underwater, phase loss, load discomfort and other status displays, providing higher reliability and durability

◆ The length of the induction coil is usually 600mm or 800mm, and when the coarse material or material is long, the induction coil is even 1 meter long or more than 1 meter in length, and there are 5--10 pieces of material heating. The induction coil is easy to replace, and different sizes of induction coils are used according to the workpiece of different diameters.
◆ The output frequency is 1-10KHZ, according to the size of the diameter of the heating workpiece, design the induction coil and capacitor, reach different frequencies, and adapt to the heating of different materials. When the material is fine, the heating frequency is higher, which can ensure heat permeability and obtain higher heating efficiency; When the material is coarse, the frequency should be lower to ensure heat permeability.
◆ Using pneumatic feeding method, for a certain bar material, adjust the equipment power and feeding beat, you can automatically launch the red-hot bar material for forging use, the operation is very convenient.
◆ Fast heating speed, high production efficiency, less oxidation and decarbonization, saving material and forging die costs. Since the principle of medium frequency induction heating is electromagnetic induction, its heat is generated in the workpiece itself, and ordinary workers can carry out continuous work of forging tasks immediately after working with medium frequency electric furnaces.
Main configuration and performance
Medium frequency induction heating forging furnace ultra-small volume, movable, covers an area of only 0.6 square meters, convenient to use with any equipment; installation, debugging and operation are very convenient, one learning can learn;

It can reach the required temperature in a very short time, which greatly reduces the oxidation of metals;
Medium frequency heating of φ15 or more bar stock, more permeable, more uniform, faster, can work 24 hours uninterrupted;
Power saving and environmental protection, more uniform and fast heat penetration, automatic feeding, greatly saving costs;
The furnace body is replaced to adapt to the different requirements of overall heating of bar stock or end heating.